Sherlock 500L Capable of L-sized (510×460mm) board

Combination of high-speed drive, high-speed imaging camera and high precision large-aperture lens, All of these are optimally and specifically designed. Achieved both performance and cost performance.
7,500mm²/sec. of inspection speed which is the best in Sherlock series

Guide to inspection time【20μm lens】

• Approx. 5 sec. for a board of 150×150mm
• Approx. 14 sec. for a board of 330×250mm
• Approx. 33 sec. for a board of 510×460mm

• *Varies according to the inspection conditions.
  Carry time and clamp time are not included.

Realized approx. 50% of speedup in comparison with the Sherlock-300 series.

Sherlock-300
5,000mm²/sec.

Sherlock-500L
7,500mm²/sec.

Sherlock-300
5,000mm²/sec.

Sherlock-500L
7,500mm²/sec.

Capable of inspections from ultramicro parts to big parts!

Inspect not only M-sized board (330*250) but also L-sized board (510*460)
PCBAs with tall parts can be inspected easily because of 45mm of clearance on the top and bottom of PCBA.

Inspection of tall parts with high depth of field!

Secured high depth of field with an exclusive design lens.
Inspections of surface-mounted parts and tall parts can be inspected at the same time.

Inspection of small parts with 10µm of maximum resolution!

Highly accurate inspection can be performed with high-magnification and high-definition images. (The resolving power of the lens is a factory option.) The PCBA back-up structure is adopted for highly accurate inspection to maintain a certain distance between camera and a part to be inspected.

Low vibration mechanism that is suitable for the inspection of the PCBA before reflow process

This can be used for the PCBA even before reflow process because the camera is driven with a high speed in X-Y directions while the PCBA stands still during inspections. It is possible to place the back-up pins to support the PCBA from the bottom.

Specifications

*Please see the table by scrolling horizontally.